How to Keep Your New Resin Bound Driveway Looking Brand New

 Write a short blog post detailing how homeowners should care for and clean their new resin bound driveway.

• 

You’ve made the investment, the installation is complete, and your home has never had more curb appeal. A high-quality resin bound driveway is naturally low-maintenance, but "low maintenance" doesn't mean "no maintenance."

To ensure your driveway keeps its pristine look and lasts its full 15-to-20-year lifespan, follow this quick, straightforward care and cleaning guide.

1. The Routine: Sweeping & Washing

The biggest threat to a resin driveway isn't traffic—it's organic debris. Leaves, twigs, and soil left to rot can cause temporary staining and create a bed for airborne weed seeds to take root.

• The Fix: Give your driveway a quick sweep with a stiff broom once every week or two.

• The Wash: Every few months, give it a hose down with clean water to flush out any fine silt from the porous gaps.

2. Jet Washing (With Caution)

Can you pressure wash a resin driveway? Yes, absolutely—but you have to use the right technique. High pressure held too close can dislodge the aggregate stones.

• The Rule: Use a maximum pressure of 150 bar. Always keep the fan lance at least 20cm (8 inches) away from the surface, and use a sweeping motion rather than focusing on a single spot. Use cold water; boiling water can soften the resin.

3. Dealing with Engine Oil & Car Fluids

Resin driveways are highly resistant to oil, but if a vehicle leaks on it, you should act quickly before the fluid attracts dirt and creates a dark smudge.

• The Fix: Soak up the spill immediately with a paper towel or absorbent cloth. Clean the remaining residue with warm water and a mild household detergent (like washing-up liquid) using a stiff brush. Flush thoroughly with clean water.

• Avoid: Harsh solvents like acetone or paint strippers, which will chemically dissolve the resin binder.

4. Preventing Physical Damage

While resin is incredibly durable under heavy vehicle loads, it can be vulnerable to sharp point-loading or shearing forces.

• Watch the Steering: Try to avoid "dry steering"—turning your car wheels sharply while the vehicle is completely stationary. This grinding action puts immense stress on the surface layer.

• Protect the Surface: If you are using a car jack, ladders, or a skip, place a wooden board underneath the points of contact to distribute the weight evenly.